01OUTDOOR LIGHTS
Split solar illumination for exterior walls
Mounted on an exterior wall, this fixture separates its power source from its light source, allowing the panel to catch sunlight while the lamp illuminates a darkened corridor or courtyard. The split architecture offers flexibility for spaces where direct exposure is limited.
The unit operates through a dual induction system, adjusting brightness across three distinct modes based on time of day and movement. It suits homeowners seeking automated lighting for garages, balconies or garden paths without complex wiring.
02DESIGN
Separated panel and lamp body
The design decouples the solar collector from the luminaire, connected by a three-metre cable. This allows the panel to be positioned in full sun while the lamp sits in a shaded area. The longest unfolded lamp measures 52.5 centimetres, creating a broad footprint that distributes light evenly across the target zone.
04MATERIALS
Durable ABS and PC construction
Constructed from wear-resistant ABS and PC materials, the housing withstands outdoor conditions with an IP65 waterproof rating. Inside, four 18650 lithium batteries provide a total capacity of 4800mAh, ensuring reliable operation. The monocrystalline silicon panel offers higher charging efficiency compared to standard polycrystalline alternatives, maintaining stable performance over time.
05DETAILS
Uniform high-brightness output
Two hundred forty COB lamp beads are arranged in a uniform pattern to eliminate glare and blind spots. The split design facilitates 360-degree light distribution, covering corners and edges effectively. Installation requires screws, included in the package, allowing secure mounting on various exterior surfaces from brick to timber.
06AT A GLANCE
The key points
- Monocrystalline silicon panel charges built-in 4800mAh battery
- 240COB beads in a split design cast 360-degree light
- Dual sensor system detects motion and ambient light levels
- ABS and PC construction rated IP65 for weather resistance
- Three-metre cable connects panel to lamp body
07
Highlights
- Product Size
- Solar Panel Approx.23.2×11.6×1.7Cm/9.1×4.6×0.7in, The Longest Unfolded Lamp is 52.5Cm/20.7In, The Wiring Length is 3 Meters
- Product Luminous Flux
- Strong Brightness: 1000Lm, Medium Brightness: 500Lm, Weak Brightness 300LM
- Battery Life
- 8 Hours of Charging During The Day, 100 Inductions Per Night, 7 Days of Use
- Use Scene
- Family Courtyard, Villa Corridor, Garden Swimming Pool, Road Photos
About this product
1, Three-stage lighting mode, light control and human body induction dual sensor system, intelligent light perception recognition, automatic charging during the day, automatic lighting at night, human body induction, to meet your needs for lighting in different scenarios. 2, Solar charging, no electricity bills throughout the year, environmental protection and energy saving, using monocrystalline silicon solar panels, higher charging efficiency and faster charging speed. 3, Comprehensive technological upgrade, higher performance, high-brightness lamp beads, evenly distributed arrangement, uniform brightness, non-glaring, stable performance. 4, It is made of plastic ABS+PC material, wear-resistant, and equipped with a screw installation package. The lamp can be installed indoors or in a place where the sun is not exposed to the sun. The solar panel is placed in the sun and the power transmission is completed through wiring, which is convenient and practical. 5, 240COB split design, 360-degree light without blind spots, suitable for multiple scenes, IP65 waterproof, outdoor installation at will, suitable for corridors, balconies, courtyards, gardens, garages, and trails.
Product Battery Specifications: Built-In 4 18650 Lithium Batteries with a Capacity of 4800Mah (Included)
Human Body Induction Mode (Highlights When A Person Comes, and The Light Goes Out 20S After a Person Walks)
Induction + Night Light Mode (the Light Is Bright When People Come, and the Low Light Is Always on When People Walk for 20S)
Light Sensing, No Lights During The Day, and Always Bright In the Dark
1 x Installation Package (Screw x 4, Expansion Screw Tube x 4)
Specification
Item Type: Solar Wall Light
Material: ABS+PC
Weight: Approx.1337g/47.2oz
Product Use: Solar Wall Light
Product Lamp Beads: 240COB
Induction Time: 20S
Waterproof Rating: IP65
Working Mode: Three-Speed Mode:
Sensing Distance: Infrared Sensor 8-12 Meters
Package List
1 x Light1 x Solar Panels
1 x Wiring
1 x Solar Panel Fixing Frame
1 x Remote Control
1 x Reminder Card
1 x Manual
Reviews
There are no reviews yet.