01FENCE & GATE ACCESSORIES
Quiet command for automated access
Tucked away within the machinery of a gate or door, this receiver board operates with quiet precision. It translates a simple press of a button into decisive mechanical action, bridging the gap between human intent and industrial movement.
Designed for engineers and DIY enthusiasts, it controls four separate channels simultaneously. Whether managing a sliding gate, a rolling shutter or lifting equipment, it provides a reliable link between your remote and the motor.
02PERFORMANCE
Super heterodyne signal clarity
The unit employs a super heterodyne working mode to maintain high receive sensitivity. This technical approach allows the 433MHz signal to penetrate physical barriers such as walls, floors and doors. You can operate the system from a reliable distance without losing connection, ensuring the command reaches the receiver even when you are not in direct line of sight.
04COMPATIBILITY
Learning common remote chips
The receiver learns codes from 2272, 2262 and 1527 chip-based remotes operating at 433MHz. This flexibility means you can pair it with various standard wireless controllers rather than being locked into a single brand. The learning process is straightforward, allowing you to integrate new remotes into your existing security or access setup quickly.
05SPECS
Compact footprint and low draw
Measuring just 7 x 5 x 3 cm in its carton, the board is physically small enough to fit inside tight enclosures. With a standby current of less than 5mA, it draws minimal power when idle. The input voltage range of DC10-14V offers flexibility for different power sources, ensuring stable operation across various installation environments.
06AT A GLANCE
The key points
- Four relays manage reverse, on/off and rotation functions
- 433MHz super heterodyne mode cuts through walls and floors
- Compatible with 2272, 2262 and 1527 chip remotes
- Compact board fits easily into existing equipment housings
- Low standby current under 5mA preserves power efficiency
07
Highlights
- 3 working modes
- (Jog/Non-Latched,inter-lock/Latched,self-lock /Self-Latched)
- Output
- Normally open, Common, Normally closed
- Product Size
- Approx. 50 x 70 x 25mm / 2.0 x 2.8 x 1.0inch
- Jog/Non-latched
- Press one button is working /ON. Loosen your finger on the same button is stop/OFF. One channel switch need one buttons remote control.
- Self -lock/Self-latched
- Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
- Inter-lock /Latched
- Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
About this product
1, It has 4 relays which can make the equipment turn or reverse, on/off and so on come true 2, Strong signal which can pass through walls, floors and doors, control receiver from any place within a reliable distance 3, The volume is small and the performance is stable and reliable, high receive sensitivity 4, It covers application ranging from like auto door, window, lifting equipment, entrance access, to security etc 5, It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control
This item has 4 relays which can make the equipment turn or reverse, on/off and so on come true. Strong signal which can pass through walls, floors and doors, control receiver from any place within a reliable distance. It covers application ranging from like auto door, window, lifting equipment, entrance access, to security etc. It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control.
It has 4 relays which can make the equipment turn or reverse, on/off and so on come true.
Strong signal which can pass through walls, floors and doors, control receiver from any place within a reliable distance.
The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from like auto door, window, lifting equipment, entrance access, to security etc.
It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control.
Specification
Description:
Features:
Specification:
Input Voltage: DC10-14V
Standby Current: <5MA
RF Frequency: 433MHZ
RF Working Mode: Super heterodyne receiver
Receiver Sensitivity: -104DBM
Remote Control Distance: >100 meter(in open environment)
Decoding Way: MCU Software decoding
Can store the number of remote control: 50
Support remote control type: Fixed code, learning code
Channel: 4CH
Wiring Method: Fixed wiring terminal
Working Voltage: DC12V
Output Current: 10A
Package Weight: Approx. 100g
Package Included:
1 x Wireless Relay Switch
1 x Remote Controller
How to use:
Note:
The color of 4 relays is random(black or blue)
Package List
Reviews
There are no reviews yet.