01GARDENING TOOLS
Consistent hydration for every green corner
A compact unit that brings the rhythm of irrigation to balconies, patios and indoor corners where a fixed tap is absent. It sits quietly beside your plants, ready to deliver precise moisture without constant attention.
This intelligent timer suits growers who value consistency across varied plant types. Whether managing a courtyard bed or an office desk setup, it automates the schedule so you can focus on cultivation rather than chore.
02MATERIALS
Durable ABS and PP housing
The body combines ABS and PP plastics, offering a robust shell that withstands daily handling in garden environments. Weighing roughly 819 grams, the device feels substantial yet portable enough to reposition as seasonal needs shift. The material choice ensures longevity against minor impacts while maintaining a clean, functional aesthetic.
04POWER
Flexible energy sources for any location
Three distinct power modes allow placement anywhere: USB plug, standard plug, or four AA batteries. This versatility means the timer functions in sheds, courtyards or offices without relying on a single outlet type. A weak current protection feature automatically halts watering when battery power dips, preserving the device’s integrity during low-energy periods.
05SETUP
Simple manual and timed operation
Users can engage manual mode by holding the switch button for three seconds to start the controller. Selecting specific pump ports allows targeted watering, while the open/close button dictates flow. For automated routines, parameters are set freely to match individual plant requirements, ensuring each species receives its ideal interval and volume.
06AT A GLANCE
The key points
- ABS and PP construction weighs approximately 819 grams
- Built-in pump lifts water up to 2.5 metres
- Operates via USB, mains plug or four AA batteries
- Flow rate adjustable between 0.3 and 0.8 litres per minute
- Compatible with 4/6 and 4/7 diameter pipelines
07
Highlights
- Product Size
- Approx. 9.7×8.5×8.5cm / 3.8×3.3×3.3in
- Application
- Garden sheds, flower beds, patios, courtyards, balconies, offices, etc.
About this product
1, The water storage container is free to choose, there is no fixed faucet limit, and you can water where you want to water. 2, Weak current protection function, when the battery power is low, the device will automatically stop watering to protect itself. 3, Three power supply modes are available: USB plug power supply, plug power supply and battery power supply (battery not included). Free and convenient, can be used anywhere. 4, The built‑in suction pump, has 2.5m lift height, and there is no need to worry about the height of the flowerpot. 5, Intelligent automatic timing watering, watering parameters can be set freely according to needs to meet the needs of different plants.
a. Power on, press and hold the switch button for 3 seconds to start the watering controller;
f. Click the set button, it will automatically stop running after watering
Due to the water level difference of the closed pipeline, the pipeline will have a siphon effect. Just adjust the relative position of the dripper and the water source to solve this problem.
It is generally recommended that the water source be placed on the ground, and the dripper should be higher than the water level.
The dripper must be inserted in place, otherwise it will cause insufficient water for the dripper behind.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Specification
Item Type: Watering Timer
Material: ABS+PP
Color: As shown in the picture
Weight: Approx.819g/28.9oz
Battery: 4 x AA batteries (not included)
Rated Current: 720mA
Interface Diameter: Φ4.8mm / 0.19in
Supporting Pipeline: 4/6, 4/7
Maximum Water Pressure: ≥30psi (200pa)
Flow: 0.3-0.8LPM
Noise: ≤65db (30cm / 11.8in distance)
Working Temperature: 0-50℃
Lift Height: ≥2.5m/8.2ft
Suction Lift Height: ≥2m/6.6ft
Two modes of operation process:
Manual mode:
b. Click the set button to select a pump port;
c. Click the “open/close” button, the pump starts to run;
d. Click the set button and select the pump port;
e. Click the “Open/Close” button to stop the pump
Set automatic mode:
c. Click the set button to set the watering time;
d. Click the set button to set the interval time;
e. Click the set button to set the number of cycles;
Package List
1 x Watering Timer(Battery Not Included)
1 x Power Adapter
1 x USB Cable
20 x Dripper
20 x Tee
1 x Hose(15m)
2 x Filter
1 x Cross Screwdriver
1 x Instruction Manual
Note
Reviews
There are no reviews yet.