ABS Filament EasyFil ABS 1.75mm White 750 gram 3D Printer Filament

The material is a high-end formulation of acrylonitrile butadiene styrene, chosen for its balance of strength and processability. With a density of 1.03 g/cc, it provides substantial mass per volume, contributing to the rigidity of the final object. The white pigment is fully opaque, masking underlying layers and creating a uniform surface that highlights geometric accuracy.

Unlike standard ABS variants, this filament exhibits limited warping during the cooling phase, maintaining dimensional accuracy across larger builds. It also delivers significantly higher impact resistance, meaning finished parts can endure knocks and drops without cracking. This durability makes it suitable for functional prototypes and everyday objects that require longevity.

Optimal results are achieved with a nozzle temperature between 220 and 270 degrees Celsius and a heated bed set to 90 to 110 degrees. A flow rate of approximately 104% and retraction of around 5mm help manage stringing and ensure clean transitions. The recommended layer height is at least 0.1mm, while fan speed should remain low, between 0 and 25 percent, to prevent premature cooling.

The 750-gram spool contains approximately 303 meters of 1.75mm filament, calculated based on its specific density. The product arrives in a compact carton measuring 20.5 by 21 by 6.5 centimeters, weighing 1.05 kilograms including the spool and packaging. This size is manageable for most desktop printers, allowing for extended print sessions without frequent reloading.

• 1.75mm diameter with a density of 1.03 g/cc
• Prints at 220–270°C on a heated bed
• High impact resistance compared to standard ABS
• Opaque white finish for clean model surfaces
• Requires intermediate experience level

EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament.

EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.

• Superb process stability and limited warping
• Significant higher impact resistance than average ABS
• Very strong and durable
• Light-weight
• Viscat softening temperature of ± 103° C
• Wide variety of vivid opaque colors

Nozzle size: ≥ 0.15mm · Layer height: ≥ 0.1mm · Flow rate: ± 104%

Print temp: ± 220 – 270° C · Print speed: Medium · Retraction: Yes ± 5mm

Heat bed: ± 90 – 110° C · Fan speed: 0-25% · Experience level: Intermediate

) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.03 g/cc · 50 gr coil · 0.75 Kg spool · 2.3 Kg spool

Ø 1.75mm · ± 20.2m · ± 303m · ± 928m

Ø 2.85mm · ± 7.6m · ± 114m · ± 350m

HS Code: 39169090 · Description: Monofilament · Country of origin: the Netherlands